ROCHEM FYREWASH F3  is supplied in liquid form or as lint-free wipes which are perfect for are ideal for hand cleaning of gas turbines blades and other gas turbine parts.

It has a higher percentage of active cleaning ingredients but lower foaming than comparable products.

Rolls Royce formulation。This cleaning chemical is also available in a specific Rolls Royce formulation.

Properties of FYREWASH F3

• Appearance: Colourless.

• Shelf life: 5 years.

• Typical properties: Density 1.00g/ml@ 20°C, PH 7 - 7.5 (20% in water).

• Dilution: FYREWASH? F3 concentrate with four (4) parts of water into a stable solution.

• Application: FYREWASH? F3 can be used with any on-line or off-line injection system.

• Water rinse: When on-line washing, as with all our chemicals, it is best carry out a rinse flush with demineralised water. For off-line washing, rinse until the run-off is clear.

• Antifreeze: If the temperature falls below +10°C, we recommend adding antifreeze. FYREWASH? F3 is compatible with Methanol, Propylene Glycol and Ethylene Glycol. Enquire about our superior freeze point depressant.

This chemical is safe and highly biodegradable. However, for off-line, crank washing all chemical solution and rinse water drainage should be collected and disposed of properly no matter what type of chemical is being used.

• EC Hazard rating: Xi. Irritant. US NFPA rating 1,1,0

• Protective measures: Non-hazardous but avoid frequent prolonged direct contact with skin to prevent possibility of de-oiling skin. Wear eye protection as a matter of course when handling any chemical.

• If spilled: Absorb large spillages with sand or earth. Flush away small spillages with water.

• Fire: Use earth or sand, carbon dioxide, foam or dry chemicals.