Using the AS 5282 Test Ring

A test is performed by mounting the AS 5282 Test Ring on a central conductor in a threader bar configuration with the ring at 90 degrees to a coil centreline. By applying a current flow shot through the threader bar the defects in the AS 5282 Test Ring can be seen around the circumference of the ring in a series of lines.

Conforms to:

• ASTM E709-08 (Sections 14.2.2, 20.6.7 & 20.8.4)

• ASTM E1444/E1444M-12 (Section 7.1.2, Annex A4)

• ASME Boiler & Pressure Vessel Code (Section V, Article 7: T-766.1)

• SAE AS5282